Electrical appliances inspection: coffee machine inspection points and inspection process

I,Coffee Machine Inspection Points

1. Overall dimensions of the coffee machine

The overall dimensions of the apparatus: length, height, width, or diameter, including all controls, handles, control knobs, or other projections, the sheathing of all flexible cords, and the dimensions of the lead connectors supplied with the apparatus are to be measured and recorded.

2. Overall quality of coffee machines

Measure and record the mass of the appliance with the flexible cord unloaded. The measured mass of the appliance shall include the appliance and all accessories provided for its use.

3. Checking the internal capacity of the coffee machine

Measure and record the maximum rated capacity of the reservoir or container of the high pressure coffee maker, record the scale of the reservoir or container, and record the maximum position at which it is filled with ground coffee.

4. Instructions for the use of high-pressure coffee machines

-List of parts for high-pressure coffee machine cleaning

-Deposition of residual water should indicate the time it can be retained in the appliance.

-Water content of a cup of filter coffee and a cup of espresso coffee

-Special instructions for making the minimum amount of coffee

-Methods and cycles of descaling

5. Additional testing of pressure coffee machines

Prepare the ground coffee according to the instructions for use provided by the manufacturer or, if not detailed in the instructions for use, according to the ratio of 7g of ground coffee per cup.

6. Descaling test

The appliance is tested with a filter and a normal coffee container but without ground coffee, and when the water has passed through the filter sufficiently it is drained off. The appliance was operated at 1.15 times the rated power. Tests were conducted with water of normal hardness of approximately 3.0 mmol/L.

7. Cleaning of coffee machines

The following aspects are generally considered when determining the difficulty of cleaning appliances and the components soiled by water or coffee through visual inspection:

-Detachable parts

-Easy-to-reach filter handle

-Removable tank or container tray soiled by water and coffee grounds

-Specified special cleaning requirements or cleaning methods in the product description

II. Coffee machine third partyinspection of goodsOverall process

1. Inspection of product quantities

The inspector arrives at the inspection site and confirms with the relevant personnel that the docking inspection products are correct, and then begins to count the number of products to ensure that the number is accurate.

2. On-site box draw

The inspector conducts the sampling according to the Acceptance Criteria, Acceptance Quality (AQL) table in the Standard Sampling Plan.

3. Coffee machine product testing

The overall inspection process includes packaging inspection, quantity checking, appearance and structure inspection, as well as function and safety testing of the coffee machine. In which the relevant points are photographed and recorded according to the whole inspection process.

4. Inspection report generation

Review inspection reports with additional photo documentation.

Third-party inspection as a coffee machine exportquality controlIn the core process, we need to strictly follow the ISO 9001 quality management system and the technical regulations of the target market (e.g. EU 2014/35/EU, FDA 21 CFR, etc.). Only by internalizing international standards into rigid constraints in the production process can we realize the strategic upgrade from product export to standard export, and provide safe and reliable China-made solutions for global coffee consumers.