How to inspect clothing? What is the standard of clothing inspection? Clothing inspection process details

Garment inspectionIt refers to the quality control activities through scientific sampling and testing methods to check whether the apparel products meet the order requirements and quality standards.inspection of goodsThe core purpose is to find and solve the quality problems before the products leave the factory, to avoid the risk of return and loss of buyers. Inspection work should follow the "prevention-oriented, full control, objective and fair" principle, throughout the garment production of pre-production, production, post-production three stages. This article will explainGarment inspectionThe standard requirements and step-by-step process.

I. General Inspection Standards for Clothing

1. Check that the quantity of product is such that it is ready for inspection;

2. Verify that the box markings correspond to the customer's requirements;

3. Check that product ratios are consistent with orders, markings and customer requirements;

4. Check whether the goods and packaging are conducive to transportation and preservation, and whether the packaging of goods meets the requirements;

5. Examine the merchandise for the inclusion of broken needles and metal;

6. Inspection of product description, style and color, checking the consistency of products with orders and samples in terms of description, style and color;

7. Measure clothing items for size to match order requirements;

8. Check that the weight of the product meets the guest's requirements;

9. Check the quality of the product;

10. Check for compliance with listing and sewing marks;

11. Check leather products for mold;

12. Flame-retardant tests may be carried out if necessary;

13. Assembly and functional testing;

14. Check other inspection items proposed by the customer.

Two,Clothing quality inspection(an official) standard

(i) General requirements

1. Fabrics and accessories are of good quality and meet customers' requirements, and the big goods are recognized by customers;

2. The style and color scheme are accurate;

3. Dimensions are within allowable tolerances;

4. Good workmanship;

5. The product is clean, neat and sells well.

(ii) Appearance requirements

1. The placket is straight, flat and of the same length. The front drawer should be smooth and uniform in width, and the inside flap should not be longer than the placket. The zipper lip should be smooth, even and not wrinkled or open. The zipper should not be wavy. Buttons are straight, even and equally spaced.

2. The lines are even and straight, the stops do not backspit, and the widths are consistent from side to side.

3. Straight, non-stirring openings.

4. Pockets square, flat service, the mouth of the bag can not be open. Pocket cover, stick pocket square and flat, before and after, height, size consistent. Pocket height.

5. Consistent size and squareness.

6. The collar notch is of the same size, the head of the barge is smooth and neat at both ends, the collar nest is round and smooth, the collar face is smooth and smooth, the elasticity is suitable, the outer mouth is straight and does not buckle, and the bottom of the collar is not exposed.

7. The shoulders are smooth, the shoulder seams are straight, the width of both shoulders is the same, and the stitching is symmetrical.

8. Sleeve length, cuff size and width are consistent, and sleeve tabs are consistent in height, length and width.

9. The back is flat, the stitching is straight, the back belt is horizontal and symmetrical, and the elasticity is appropriate.

10. The bottom edge is rounded, smooth, oakum, ribbed to the same width, and ribbed to the stripe stitching.

11. The size and length of each part of the lining should be appropriate to the fabric, without hanging or spitting.

12. The ribbons and laces on the outside of the garment should be symmetrical on both sides.

13. Cotton padding should be plain, evenly pressed, neatly routed, and the seams of the front and back pieces aligned.

14. If the fabric has fluff (hair), the direction should be clear and the fluff (hair) should be reversed in the same direction throughout the piece.

15. In the case of styles closed through the sleeve, the length of the closure should not exceed 10 centimeters, and the closure should be consistent, firm and neat.

16. For fabrics that require stripe-to-grid matching, the stripes should be matched accurately.

(iii) Workmanship requirements

1. The threads are flat and not wrinkled or twisted. Double thread part of the requirements of the double needle car sewing. The bottom line is even, no skipped stitches, no floating threads, no uninterrupted threads.

2. Drawing lines and making marks cannot be done with colored drawing powder, and all marks cannot be scribbled with pens or ballpoint pens.

3. The surface and lining fabrics should not have color difference, dirty, drawstring, and non-recoverable needle eyes.

4. Computerized embroidery, logo, pockets, pocket flaps, sleeve tabs, pleating, eyelets, Velcro, etc., the positioning should be accurate and the positioning holes should not be exposed.

5. Computerized embroidery requires clear, clear threads, reverse lining paper trimmed clean, printing requires clear, non-transparent, non-degumming.

6. All bag corners and bag lids, if required to beat dates, should be accurately and correctly positioned.

7. The zipper shall not be wavy and shall pull up and down without obstruction.

8. If the lining fabric is light in color and will be color permeable, the inside seam stops should be trimmed neatly and the threads should be cleaned up, and lining paper should be added if necessary to prevent color permeability.

9. When the lining is a knitted fabric, allow 2 centimeters for shrinkage.

10. Both ends of the cap rope, waist rope and hem rope should be 10 centimeters exposed at both ends after being fully pulled apart, and if both ends of the cap rope, waist rope and hem rope are held by the car, they can be plainly obeyed in a flat state without being exposed too much.

11. Chicken eye, crash nails and other accurate location, can not be deformed, should be nailed tightly, not loose, especially when the fabric is thinner varieties, once found to be repeatedly viewed.

12. The four-in-one fasteners are accurately positioned, well elasticized, not deformed, and cannot be rotated.

13. All fabric tabs, button tabs, and other high stress tabs should be backstitched for reinforcement.

14. All nylon webbing and rope cuts should be made with a hot cut or burned notch, otherwise they will come apart and pull off.

15. Top pocket cloths, underarms, windproof cuffs, and windproof leg openings should be secured.

16. Skirts and pants: The size of the waistband is strictly controlled within ± 0.5 centimeters.

17. For skirts and pants: the dark line of the back wave should be closed with a thick thread, and the bottom of the wave should be reinforced with a backstitch.

Three,Clothing inspection steps process

1. According to the sampling criteria (such as AQL sampling principles) from the whole batch of goods randomly selected from the inspection of cartons, to ensure that the sample is representative, to avoid selective sampling.

2. set the drop height according to the industry test standard (e.g. 30-80cm according to the size and weight of the carton), and drop test the carton on 6 sides, 1 adhesive edge and 1 corner in turn.

3. Based on the information provided by the customer, check the information of the outer shipping marks one by one, including but not limited to the order number, model number, batch number, destination, box number, gross/net weight, etc., to ensure that all the information is exactly the same as the order requirements.

4. After opening the box, first against the customer's packing specifications, to confirm that the color and size of the clothing in the box with the order requirements.

5. When unpacking, first touch the fabric of the garment to sense whether the handfeel is consistent with the confirmed sample garment, and at the same time check whether there are problems such as moisture and odor in the fabric.

Appearance inspections are performed in the following order:

Verify that the style and color are consistent with the order and sample garment;

Check the printing and embroidery: whether the pattern clarity, position and edge are smooth, without leakage, misprinting, offline and other problems;

Examine surface defects: no obvious stains, thread residue, fabric blowouts, etc;

Whether the turning line is straight and smooth, no skipped stitches, and whether the stitch spacing is even;

Whether the height difference of the pocket is within the permissible range (usually ≤0.5cm);

Button door cuts are flat and free of burrs, buttonholes match buttons, collars are flat and free of ruffles, and folds smoothly.

6. Based on customer information to check the hangtags, price tags or stickers, wash marks, the main mark and other information.

7. Strictly according to the size chart provided by the customer, at least 5 samples of each style and color will be randomly selected, and the key dimensions (such as length, bust, shoulder width, sleeve length, etc.) will be measured and the specific data will be recorded.

8. At the end of the inspection, organize all the problems found and report them.

9. Based on the inspection records to write a formal report, the content should include: inspection time, location, sample size, each part of the test results, details of the problem, the preliminary conclusion (qualified / unqualified / to be determined).

Above is the clothing inspection of the relevant content, if you want to know more about the inspection of goods-related knowledge and information, welcome to visit theInspection OnlineOfficial website.